سید محمد امام

مقالات علمی چاپ شده در مجلات

1. "Effects of cryogenic cooling on cutting temperature and surface roughness in turning of AA7075 aluminum alloy"
   Sadegh Ranjbar, Abolfazl Foorginejad, Emam SayyedMohammad, Morvarid Ebadi, Keyvan Shiri
   Scientific Reports, pp.1-12, 2026
2. "Enhanced 3D imaging accuracy using curved sensors: a simulation-based approach"
   Emam SayyedMohammad, Hamidreza Daliri, Abolfazl Foorginejad , Siamak Khatibi
   Scientific Reports, Vol. 13004, pp.1-20, 2026
3. "A novel multi-bead overlapping model for wire arc additive manufacturing (WAAM) processes with dissimilar beads area strategy"
   Abolfazl Foorginejad, Mohammad Zarei, Emam SayyedMohammad, Seyed Mohammad Javad Hosseini Baghdadabadi
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025
4. ""
   ابوالفضل فورگي نژاد, Emam SayyedMohammad, مسعود رخش خورشيد, Hossein Afshari
   Vol. 34, pp.74-94, 2025
5. "Mechanical properties and work hardening behaviour of spring steel after the quenching-partitioning process"
   Aliakbar Abedini, Habibollah Rastegari, Emam SayyedMohammad
   CANADIAN METALLURGICAL QUARTERLY, Vol. 63, pp.1169-1182, 2024
6. "Learning-Based Proof of the State-of-the-Art Geometric Hypothesis on Depth-of-Field Scaling and Shifting Influence on Image Sharpness"
   Khatibi Siamak, Wen Wei, Emam SayyedMohammad
   Applied Sciences-Basel, Vol. 14, 2024
7. "Statistical Analysis of Quenching & Partitioning Effects on Mechanical Properties of 1.7102 Steel Using ANOVA Technique"
   Abedini Ali Akbar, Rastegari Habibollah, Emam SayyedMohammad, Seyedkashi Seyed Mohammadhossein
   Iranian Journal of Materials Forming, Vol. 11, pp.4-17, 2024
8. "Enhancement of Additive Manufacturing Processes for Thin-Walled Part Production Using Gas Metal Arc Welding (GMAW) with Wavelet Transform"
   Abolfazl Foorginejad, Siamak Khatibi, Hojjat Torshizi, Emam SayyedMohammad, Hossein Afshari
   Applied Sciences-Basel, Vol. 14, pp.2-18, 2024
9. "Image processing technique for measuring the weld dilution and heat-affected zone to model the gas metal arc welding process by a neuro-fuzzy system"
   Abolfazl Foorginejad, Emam SayyedMohammad, Hossein Jamshidi, Sadegh Ranjbar
   JOURNAL OF OPTICAL TECHNOLOGY, Vol. 90, pp.743-752, 2023
10. ""
    علي اكبر عابديني, حبيب ا... رستگاري, Emam SayyedMohammad
    Vol. 33, pp.59-72, 2022
11. "Measurement accuracy assessment of the 3D laser triangulation scanner based on the iso-disparity surfaces"
    Mehdi Irandoust, Emam SayyedMohammad, Mohammad Ali Ansari
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 44, 2022
12. "Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF)"
    Masoud Rakhshkhorshid, Emam SayyedMohammad, Mohammad Lakhi, Saeed Ghahremani
    Journal of Applied and Computational Mechanics, Vol. 8, pp.1-10, 2022
13. "3D reconstruction accuracy improvement of a stereo vision system by changing the convergence angle of the cameras"
    S. A. Sayyedbarzani, Emam SayyedMohammad
    JOURNAL OF OPTICAL TECHNOLOGY, Vol. 88, pp.574-578, 2021
14. "Evaluation of the quantization error in convergence stereo cameras"
    S. A. Sayyedbarzani, Emam SayyedMohammad
    JOURNAL OF OPTICAL TECHNOLOGY, Vol. 87, pp.495-500, 2020
15. ""
    Emam SayyedMohammad, اميرمحمد رضايي پور, ابوالفضل فورگي نژاد
    Vol. 15, pp.565-575, 2019
16. ""
    maryam ansari, ghasem amirian, Emam SayyedMohammad, S. jalal hemati
    Vol. 6, pp.20-29, 2019
17. "Dimensional deviation measurement of ceramic tiles according to ISO 10545-2 using the machine vision"
    Emam SayyedMohammad, S. A. Sayyedbarzani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 100, pp.1405-1418, 2019
18. ""
    ABOALFAZL FOORGINEJAD, Emam SayyedMohammad, MORTEZA TAHERI
    Vol. 48, pp.219-227, 2018
19. ""
    khalil khalili, Emam SayyedMohammad
    Vol. 5, pp.52-62, 2018
20. ""
    Hoseininia S. Javad, khalili khalil, Emam SayyedMohammad
    Vol. 15, pp.377-386, 2016
21. ""
    teheri morteza, foorginejad abolfazl, mehdi shiva, Emam SayyedMohammad, hoshang hadadi
    Vol. 6, pp.285-294, 2016
22. ""
    hosein amirabadi, s. yousef ahmadi broghani, Emam SayyedMohammad
    Vol. 6, pp.239-248, 2016

مقالات علمی ارائه شده در همایش‌ها

1. "34th Annual International Conference on Mechanical Engineering of Iran (ISME 2026)"
   Abolfazl Foorginajd, Emam SayyedMohammad, Hossein Afshari
   Intelligent Modeling and Optimization of MRR in WEDM of VCN150 Using GPR and Genetic Algorithm, 2026
2. "34th Annual International Conference on Mechanical Engineering of Iran (ISME 2026)"
   Seyed Yousef Ahmadi Brooghani, Emam SayyedMohammad, Abolfazl Foorginejad
   Finite Element Analysis and Taguchi-Driven Optimization of Spur Gear Design for Reduced Peak Stress, 2026
3. "the 22th National and 11th International Conference of Manufacturing Engineering"
   Abolfazl Foorginejad , Zahra Karimi shamsabadi, Emam SayyedMohammad, Hossein Afshari
   Investigation of the Effects of Process Parameters on the Cutting Geometry of 7075 Aluminum Alloy in Abrasive Water Jet Machining, 2026
4. "the 22th National and 11th International Conference of Manufacturing Engineering"
   Emam SayyedMohammad, ALI Valipur, Abolfazl Foorginejad
   Finite Element and Taguchi Analysis of Orthogonal Cutting of AISI 1045 Steel, 2026
5. "1st International & 7th National conference on Mechanical-civil engineering and advanced technologies"
   Abolfazl Foorginejad, Emam SayyedMohammad, Mohammad Mehdi Mohammadi, Hossein Afshari
   Investigation of the Effect of Electrical Discharge Machining (EDM) Process Parameters on the Material Removal Rate of MO40 Steel, 2025
6. "1st International & 7th National conference on Mechanical-civil engineering and advanced technologies"
   Abolfazl Foorginejad, Emam SayyedMohammad, Mojtaba Arabzadeh, Hossein Afshari
   Investigation of the Effect of Machining Parameters and Graphene-Coated Tools on Built-Up Edge Formation in Turning of Aluminum Alloy 7075 Using the Taguchi Method, 2025
7. "The 33th Annual International Conference of Iranian Society of Mechanical Engineers"
   Abolfazl Foorginejad, Emam SayyedMohammad, Hossein Afshari
   Effects of Welding Speed and Voltage on the Weld Bead Geometry in Gas Metal Arc Welding, 2025
8. "The 33th Annual International Conference of Iranian Society of Mechanical Engineers"
   Abolfazl Foorginejad, Emam SayyedMohammad, Vahid Abdollahi, Hossein Afshari
   Modeling Biocompatible Scaffolds with Circular Sections Using Multiple Linear Regression, 2025
9. "21th National and 10th International Conference of Manufacturing Engineering"
   Foorginejad Abolfazl , Abdollahi Vahid , Emam SayyedMohammad, Afshari Hosein
   Study of mechanical properties and porosity of bio-scaffolds in different geometries, 2025
10. "21th National and 10th International Conference of Manufacturing Engineering"
    Foorginejad Abolfazl , Emam SayyedMohammad, Afshari Hosein
    Fabrication of Inclined Thin-Walled Structures via Wire Arc Additive Manufacturing, 2025
11. "21th National and 10th International Conference of Manufacturing Engineering"
    Emam SayyedMohammad, Khatibi Siamak , Foorginejad Abolfazl
    Clothing dimensional measurement using the machine vision technique, 2025
12. "7th International Conference on Welding and Non Destructive Testing"
    Foorginejad Abolfazl, Emam SayyedMohammad
    Cubic Modeling of Weld Bead Geometry in the Wire-Arc Directed Energy Deposition, 2025
13. "7th International Conference on Welding and Non Destructive Testing"
    Foorginejad Abolfazl , Emam SayyedMohammad, Borhani Mahdi , Afshari Hossein
    Effect of Welding Speed on Microhardness, Microstructure, and Bead Geometry in GMAW Process, 2025
14. "7th International Conference on Welding and Non Destructive Testing"
    Foorginejad Abolfazl , Emam SayyedMohammad, Afshari Hosein
    Manufacturing of Cylindrical Parts by Wire-Arc Directed Energy Deposition Method, 2025
15. "ICME2024"
    aboalfazl foorginejad, Emam SayyedMohammad, hosein afshari, hojjat torshizi, mahdi danesh
    Investigating the Effects of Wire Speed and Welding Speed on the Weld Bead Geometry in Wire Arc Directed Energy Deposition (DED), 2024
16. "ICME2024"
    Emam SayyedMohammad, abolfazl foorginejad, mehdi danesh
    Dimensional quality control of screw using machine vision technique, 2024
17. "ICME2024"
    aboalfazl foorginejad, Emam SayyedMohammad, hosein afshari, abbas kamgar, mehdi danesh
    Experimental Investigation of the Pulse Shape in WEDM on the Material Removal Rate of VCN150 Steel, 2024
18. "the 12th International Conference on Computer Engineering and Networks- CENet 2022"
    Subhash Chandra Ranga, Siamak Khatibi, Emam SayyedMohammad
    Simulation of the UV Radiation Penetration into Seawater, 2022
19. ""
    Maryam Ansari, Emam SayyedMohammad, abolfazl foorginejad
    روشي براي ارزيابي عدم قطعيت اندازه گيري اسكنر هاي سه بعدي, 2022
20. ""
    vahid Movahedpor, abolfazl foorginejad, Emam SayyedMohammad
    بررسي خواص مكانيكي قطعات فلزي پليمري توليد شده با روش هاي ساخت افزايشي, 2022
21. ""
    Abolfazl foorginejad, Emam SayyedMohammad, Mojtaba Arabzadeh
    مطالعه عملكرد منطق فازي در مدل سازي پارامترهاي مدل منبع حرارت گلداك درجوشكاري, 2022
22. ""
    Emam SayyedMohammad
    كنترل كيفيت زنجيرهاي غلطكي بر اساس استاندارد ملي ايران به شماره 16308, 2021