سيد محمد امام

Journal Paper

1. "Effects of cryogenic cooling on cutting temperature and surface roughness in turning of AA7075 aluminum alloy"
   Sadegh Ranjbar, Abolfazl Foorginejad, , Morvarid Ebadi, Keyvan Shiri
   Scientific Reports, pp.1-12, 2026
2. "Enhanced 3D imaging accuracy using curved sensors: a simulation-based approach"
   , Hamidreza Daliri, Abolfazl Foorginejad , Siamak Khatibi
   Scientific Reports, Vol. 13004, pp.1-20, 2026
3. "A novel multi-bead overlapping model for wire arc additive manufacturing (WAAM) processes with dissimilar beads area strategy"
   Abolfazl Foorginejad, Mohammad Zarei, , Seyed Mohammad Javad Hosseini Baghdadabadi
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025
4. ""
   ابوالفضل فورگي نژاد, , مسعود رخش خورشيد, Hossein Afshari
   Vol. 34, pp.74-94, 2025
5. "Enhancement of Additive Manufacturing Processes for Thin-Walled Part Production Using Gas Metal Arc Welding (GMAW) with Wavelet Transform"
   Abolfazl Foorginejad, Siamak Khatibi, Hojjat Torshizi, , Hossein Afshari
   Applied Sciences-Basel, Vol. 14, pp.2-18, 2024
6. "Mechanical properties and work hardening behaviour of spring steel after the quenching-partitioning process"
   Aliakbar Abedini, Habibollah Rastegari,
   CANADIAN METALLURGICAL QUARTERLY, Vol. 63, pp.1169-1182, 2024
7. "Statistical Analysis of Quenching & Partitioning Effects on Mechanical Properties of 1.7102 Steel Using ANOVA Technique"
   Abedini Ali Akbar, Rastegari Habibollah, , Seyedkashi Seyed Mohammadhossein
   Iranian Journal of Materials Forming, Vol. 11, pp.4-17, 2024
8. "Learning-Based Proof of the State-of-the-Art Geometric Hypothesis on Depth-of-Field Scaling and Shifting Influence on Image Sharpness"
   Khatibi Siamak, Wen Wei,
   Applied Sciences-Basel, Vol. 14, 2024
9. "Image processing technique for measuring the weld dilution and heat-affected zone to model the gas metal arc welding process by a neuro-fuzzy system"
   Abolfazl Foorginejad, , Hossein Jamshidi, Sadegh Ranjbar
   JOURNAL OF OPTICAL TECHNOLOGY, Vol. 90, pp.743-752, 2023
10. "Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF)"
    Masoud Rakhshkhorshid, , Mohammad Lakhi, Saeed Ghahremani
    Journal of Applied and Computational Mechanics, Vol. 8, pp.1-10, 2022
11. "Measurement accuracy assessment of the 3D laser triangulation scanner based on the iso-disparity surfaces"
    Mehdi Irandoust, , Mohammad Ali Ansari
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 44, 2022
12. ""
    علي اكبر عابديني, حبيب ا... رستگاري,
    Vol. 33, pp.59-72, 2022
13. "3D reconstruction accuracy improvement of a stereo vision system by changing the convergence angle of the cameras"
    S. A. Sayyedbarzani,
    JOURNAL OF OPTICAL TECHNOLOGY, Vol. 88, pp.574-578, 2021
14. "Evaluation of the quantization error in convergence stereo cameras"
    S. A. Sayyedbarzani,
    JOURNAL OF OPTICAL TECHNOLOGY, Vol. 87, pp.495-500, 2020
15. ""
    maryam ansari, ghasem amirian, , S. jalal hemati
    Vol. 6, pp.20-29, 2019
16. ""
    , اميرمحمد رضايي پور, ابوالفضل فورگي نژاد
    Vol. 15, pp.565-575, 2019
17. "Dimensional deviation measurement of ceramic tiles according to ISO 10545-2 using the machine vision"
    , S. A. Sayyedbarzani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 100, pp.1405-1418, 2019
18. ""
    khalil khalili,
    Vol. 5, pp.52-62, 2018
19. ""
    ABOALFAZL FOORGINEJAD, , MORTEZA TAHERI
    Vol. 48, pp.219-227, 2018
20. ""
    hosein amirabadi, s. yousef ahmadi broghani,
    Vol. 6, pp.239-248, 2016
21. ""
    teheri morteza, foorginejad abolfazl, mehdi shiva, , hoshang hadadi
    Vol. 6, pp.285-294, 2016
22. ""
    Hoseininia S. Javad, khalili khalil,
    Vol. 15, pp.377-386, 2016

Conference Paper

1. "the 22th National and 11th International Conference of Manufacturing Engineering"
   Abolfazl Foorginejad , Zahra Karimi shamsabadi, Hossein Afshari
   Investigation of the Effects of Process Parameters on the Cutting Geometry of 7075 Aluminum Alloy in Abrasive Water Jet Machining, 2026
2. "the 22th National and 11th International Conference of Manufacturing Engineering"
   ALI Valipur, Abolfazl Foorginejad
   Finite Element and Taguchi Analysis of Orthogonal Cutting of AISI 1045 Steel, 2026
3. "1st International & 7th National conference on Mechanical-civil engineering and advanced technologies"
   Abolfazl Foorginejad, Mohammad Mehdi Mohammadi, Hossein Afshari
   Investigation of the Effect of Electrical Discharge Machining (EDM) Process Parameters on the Material Removal Rate of MO40 Steel, 2025
4. "1st International & 7th National conference on Mechanical-civil engineering and advanced technologies"
   Abolfazl Foorginejad, Mojtaba Arabzadeh, Hossein Afshari
   Investigation of the Effect of Machining Parameters and Graphene-Coated Tools on Built-Up Edge Formation in Turning of Aluminum Alloy 7075 Using the Taguchi Method, 2025
5. "The 33th Annual International Conference of Iranian Society of Mechanical Engineers"
   Abolfazl Foorginejad, Hossein Afshari
   Effects of Welding Speed and Voltage on the Weld Bead Geometry in Gas Metal Arc Welding, 2025
6. "The 33th Annual International Conference of Iranian Society of Mechanical Engineers"
   Abolfazl Foorginejad, Vahid Abdollahi, Hossein Afshari
   Modeling Biocompatible Scaffolds with Circular Sections Using Multiple Linear Regression, 2025
7. "21th National and 10th International Conference of Manufacturing Engineering"
   Khatibi Siamak , Foorginejad Abolfazl
   Clothing dimensional measurement using the machine vision technique, 2025
8. "21th National and 10th International Conference of Manufacturing Engineering"
   Foorginejad Abolfazl , Abdollahi Vahid , Afshari Hosein
   Study of mechanical properties and porosity of bio-scaffolds in different geometries, 2025
9. "21th National and 10th International Conference of Manufacturing Engineering"
   Foorginejad Abolfazl , Afshari Hosein
   Fabrication of Inclined Thin-Walled Structures via Wire Arc Additive Manufacturing, 2025
10. "7th International Conference on Welding and Non Destructive Testing"
    Foorginejad Abolfazl , Borhani Mahdi , Afshari Hossein
    Effect of Welding Speed on Microhardness, Microstructure, and Bead Geometry in GMAW Process, 2025
11. "7th International Conference on Welding and Non Destructive Testing"
    Foorginejad Abolfazl , Afshari Hosein
    Manufacturing of Cylindrical Parts by Wire-Arc Directed Energy Deposition Method, 2025
12. "7th International Conference on Welding and Non Destructive Testing"
    Foorginejad Abolfazl,
    Cubic Modeling of Weld Bead Geometry in the Wire-Arc Directed Energy Deposition, 2025
13. "ICME2024"
    aboalfazl foorginejad, hosein afshari, abbas kamgar, mehdi danesh
    Experimental Investigation of the Pulse Shape in WEDM on the Material Removal Rate of VCN150 Steel, 2024
14. "ICME2024"
    abolfazl foorginejad, mehdi danesh
    Dimensional quality control of screw using machine vision technique, 2024
15. "ICME2024"
    aboalfazl foorginejad, hosein afshari, hojjat torshizi, mahdi danesh
    Investigating the Effects of Wire Speed and Welding Speed on the Weld Bead Geometry in Wire Arc Directed Energy Deposition (DED), 2024
16. "the 12th International Conference on Computer Engineering and Networks- CENet 2022"
    Subhash Chandra Ranga, Siamak Khatibi,
    Simulation of the UV Radiation Penetration into Seawater, 2022
17. ""
    Maryam Ansari, abolfazl foorginejad
    روشي براي ارزيابي عدم قطعيت اندازه گيري اسكنر هاي سه بعدي, 2022
18. ""
    Abolfazl foorginejad, Mojtaba Arabzadeh
    مطالعه عملكرد منطق فازي در مدل سازي پارامترهاي مدل منبع حرارت گلداك درجوشكاري, 2022
19. ""
    vahid Movahedpor, abolfazl foorginejad,
    بررسي خواص مكانيكي قطعات فلزي پليمري توليد شده با روش هاي ساخت افزايشي, 2022
20. ""
    
    كنترل كيفيت زنجيرهاي غلطكي بر اساس استاندارد ملي ايران به شماره 16308, 2021